Pressure washing or power washing is the use of high-pressure water sprays to remove dirt from loose paint, mold, wrinkles, dust, mud, chewing gum, and surfaces and substances such as buildings, vehicles, and concrete surfaces. The amount of mechanical pressure washing washer needs to express in gallons or liters per minute, it is often pump-designed and is not variable. The pressure expressed in pounds per square inch, Pascal, or bar is designing within the pump but it varies on adjusting the un-loader valve. Machines available that create pressures at 750 to 30,000 psi (5 to 200 MPa) or more are available.
Pressure washer parts are important when you need to replace the parts of the desired washer. It is important to know which parts are suitable for your washing machine. These are many brands that are good to replace with parts of the original brand. There are a number of parts that are universally made that fit with any washer machine. So before ordering parts you make sure that your machine needs an original product to replace or support universally made products.
01. Karcher pressure washer parts 15-Inch Surface Cleaner Attachment, 3200 PSI Rating
Karcher pressure washers parts promise that it’s a cleaner and faster tool ever. Its two spinning nozzles provide professional-level cleaning in an area of 15 “wide. The standard spray cleans flat surfaces up to 4 xs higher than nozzles. This product is compatible with gas power washers up to 3200 psi with fast connection fittings. Product dimensions (LXWXH): 15 x 15 x 6.7 inches. It is nicely compatible with most of the machines. At first removes lines leaving the nozzle at a fixed height from the surface.
This item is suitable for cleaning large surfaces such as driveways, patios, decks, and sidewalks. Also cleans vertical surfaces, including garage doors and home siding. Rotation speed (rpm): 1500. A splash-free skirt keeps you dry while you clean. The pressure washer parts Karcher 15 “Surface Cleaner works in harmony with your gas pressure washer parts diagram (up to 3200 psi). It is able to provide professional-level cleaning without a splash. Connect quickly to adjust the pressure washer. You will get professional cleaning results with Karcher power washer parts 15 “Surface Cleaner.
- Ultimate time saver
- Suitable for flat surfaces
- Splash-free skirt
- Works with most brands
- An absolutely great attachment
- Real quality and works great
- Saves your time and your effort
- This makes a 4 or 5-hour job and an extra 1-hour job
- It will get about 75% to 90% of the empty concrete
- The product may come to you as defective from the manufacturer
- The pressure wash hand can’t swing 360 degrees if you want
02. Annovi Reverberi, AR North America, SRMW22G26-EZ, 2.2 GPM, 2600 PSI Economy Axial Radial Drive Pump
The Annovi Reverberi SRMW 22G26-EZ and SRMW 22G26-EZ-SX are 2,600 PSI. Triplex plunger pumps are available in two different mounting configurations. This pump is for vertical gas engine powered units. The mounting flange provides convenient connection to most 7/8 “diameter shaft vertical gas engines with spans at 2, 6 GPM, 2,600 psi. Come with a 3,400 rpm, with 4 – 7 hp (cc reference to the HP chart). It fits most OEM carts. The pump includes a built-in pressure control valve and a downstream chemical injection system. It has also an EZ start valve and heat relief valve.
This product is 600 aluminum vertical gas flange residential plunger pumps. It comes with two different mounting configurations. It includes 2 GPM2, 600 psi spin 3, and 400 rpm. This pump mounts directly to the engine shaft. The mounting flange provides a convenient connection for most 7/8 “diameter. It having shaft gas engines 4 – H HP engine (see Figure for a figure of total consumer HP estimated by CC). The empty shaft pump has a built-in pressure control valve and a chemical injector. This Upgraded version grade valve for you. It includes a heat relief valve that you should consider. There is a 3-piston periodic volumetric pump for cleaning unit use. It’s having an Integral control valve that everyone wants to have. Die-cast aluminum alloy pump body. The piston is available for a swashplate mechanism. You will have pistons are rigid and tempered steel 180-degree rotating shaft configuration (SX).
- Universal replacement
- Rated 2 GPM at 2600 psi
- Built for easy and quick winter start
- A built-in unloader is including in it
- A chemical injector you will get within it
- The type of power source is gas-powered
- Works fine and is fundamentally easy to replace
- Removes the pump with the inverted machine and installs the easiest way
- Works great, for a long time, no kitty litter is necessary
- This is the perfect fit for your troy-built pressure washer
- Low cost instead of full pressure washer
- You may encounter problems when getting support from customer service
- You should check your warranty before buying the product
03. Briggs & Stratton 1/4-Inch X 25′ Pressure Washer Hose 196006GS
Each of these hoses is calling 1/4 “or 5/8”. The hose itself is 12mm out of diameter (meaning a bit larger than // 1 “) ting” 14mm out of diameter. You want it just to wash away most customer stress. Its GPM, 2550 psi fits just like the main hose of a pressure washer.
It is not more than a brother’s hose burn and expensive sierra hose. Briggs and Stratton’s replacement is easy with the 1/4-inch x 25 ’pressure washer hose with 196006GS. Stephen even said that the brass and hose were of better quality and more flexible. It is because he was too strong to get around impossibly complex objects. it burns in the first place, and he thinks to pay a lot for his sears. More than paying for the pressure hose, he even came to meet Alex. Alex is a great person where he found Stephen’s special feeling and having fun on it. And finally, Alex suggests Stephen replace his hose with Briggs & Stratton 1/4-Inch X 25′.
- Part number 196006GS of Briggs and Stratton
- 1/4 “x 25 ‘pressure washer hose
- Genuine is part of Briggs and Stratton
- Fitting 22mm / 14mm nipple
- Universally pressure washer fits
- You will not get any loopholes while working for a long time.
- It is making with quality connectors that are easy to turn on and off
- Good quality, the great product you can buy from Amazon
- Great replacement hose you will find in the market
- Fits perfectly and works as it should
- Registering and rolling up is not as hard and easy as the original
- You may have to pay extra for Briggs and Stratton
04. Obecome Pressure Multiple Degrees Washer Spray Nozzle Tips,5-Pack
Different spray angles allow you to clean accessible areas quickly and easily. 5 packs are 65-degree brass soap nozzle, 0-degree red stainless steel nozzle tip. You will find a 15-degree yellow stainless steel nozzle tip. 25-degree green stainless steel nozzle tip and including 40-degree white stainless steel nozzle tip. Do not use a ladder to clean or spray water for the plant with this spray nozzle. The product is designing for high-pressure washing up to 4000 psi. More applications are swifter that can connect to a quick-connect wand for applications and more.
The tip includes a colorful protective jacket and it has 1/4 quick connection design spray angles at 0 degrees, 15 degrees, 25 degrees, 40 degrees, 65 degrees. It is producing for high-pressure washing. The nozzle cover material is ADL. The nozzle tip hardness is stainless steel or ceramic. The 65-degree spray angle type is brass material. 5 Individual Spray Angle Tips are Fulfill needs in a variety of situations such as watering your flowers and plants, car washes. This you can attach to quick-connection wood for sweeper applications and more.
- Work on anything less than 2.5 GPM and 3000 PS
- Works great on your Ryobi RY141612
- Incredible price compared to big box stores
- These perfectly fit the Ribi Power Washer, 1600PSI model
- This nozzle will get on your Green Works sprayer
- Go for it and it will never disappoint your
- Even more beautiful than the original set, less expensive
- Work exactly like the roots included with the pressure washer
- Good quality tips for washing your stress
- These are of great quality and great work
- Replacement tips for 1,800 lb power washers
- Read the instruction before replacement
- You may encounter problems communicating with customer service
05. AR Blue Clean PW909100K Universal Electric Power Washer Replacement Kit
An effective kit that comes with a standard gun, high-pressure hose, detergent bottle, turbo nozzle lens, varia-spray nozzle lens, and adapter to adapt to the electric power washer. High-pressure hose is20. The detergent bottle is 25oz. The Turbo nozzle lens is including the pack. Heavy-spray nozzle lance you will get with this. There is an adapter that supports any electric power washer. High-pressure foam – 2.2 max GPM. Also fits other electrical units with 22mm-15 twist connectors. The product is designing for cooling water units up to 1900 psi only.
This Universal kit is easily matched with most of the pressure washer machine. You would find this is an effective kit that comes with a standard gun and high-pressure hose. This will not work on Blue Clean Speedy Wash Units. There is an AR Blue Clean Trigger Gun with Safety Lock. Its weight is 1.05 lb. Turbo nozzle lens designed for high impact cleaning. Only you can use on hard surfaces like driveways, cement surfaces, patio bricks, etc.
- Electric cold water pressure is great for washers
- AR Blue Clean and Consumer Grade
- Universal kit for electric pressure washing
- Not recommended for gas-powered pressure washers
- The kit contains the most popular replacement parts. Handle length: 18.5 inches
- The hose is clearly described in the 20-foot long description
- The 2014 15-foot and 25-foot answers are both correct
- Wash it up very easily at the washer
- It actually fits your sculptor 1750 pressure washer perfectly
- Good pressure and both attachments work great
- Their duct is incompatible with its hose
- You may face problems with their customer service
06. Briggs & Stratton 201497GS Outlet Kit for Pressure Washers
201497GS Outlet Kit is the only genuine part of Briggs and Stratton. This is specifically designing manufacturing, and testing to OEM standards. OEM standard helps to provide the best performance on Briggs and Stratton engines. The genuine parts of the Briggs and Stratton guaranteed you to fit with your machine. Pressure washer parts home depot you can use this as the best part of the market. The Use of this part ensures proper installation on your machine by following their instruction.
There is no substitute for keeping engine-driven equipment healthy. To increase the life of the engine, use real parts of Briggs and Stratton. This will meet the features of the original equipment. The non-original parts may look fine based on the look of the use. But they do not match the genuine Briggs and Stratton parts in terms of performance. Use authentic parts to maintain good engine health from season to season. Order this pressure washer parts Amazon would be the best way to purchase. Before to install you should have look at the pressure washer parts diagram.
Mr. Jon bought this item a few years ago and it is working perfectly in the case of Briggs and Stratton Power Washer. There must be some water in the pump in one season and the water must have cracked along the pipe and thread. There is a slight difference in appearance and the threaded part but it is long-lasting. He usually keeps it in an attached garage that never goes below 50 degrees. In the last few years, he has stored it in the shed and the winter is having extra long this year. He finally learned the lesson after so many years to make sure there is no water left; otherwise, you could have a bigger problem. Buy this hot water pressure washer parts and be happy with your machine.
- Briggs and Stratton 201497 GS
- Outlet kit for your washer machine
- Genuine Briggs and Stratton part
- Consult the owner’s manual for identifying the correct part number
- Suitable replacement for Husky 2200 gas pressure washer
- Don’t feel pressured, buy it and you’ll be happy
- Bought an outlet valve for my petrol pressure washer
- Suitable fit for my artisan quick-start power washer
- My old Troy built-in pressure washer worked perfectly
- You may have a problem while communicating with customer service
- Don’t purchase if it does not fit in your pressure washer machine
07. Karcher 8.756-105.0 25-Foot Replacement Hose for Gas & Electric Pressure, Brown/A
Karcher’s 25-foot replacement hose is perfect for replacing a lost pressure washer hose or upgrading to an old one. Includes an adapter for compatibility with both fast connection and M22 threaded connection. This thermoplastic hose fits 366 psi. Karcher electric models are K1700-K2000, and other brands of power washers (up to 3600 psi). It is rating the best parts for Karcher pressure washer gas models. Karcher electronic models do not fit K2 / K3 / K4 / K5.
Karcher offers a wide range of home and garden cleaning products and is a trusted brand for health and home care. We are one of the leading brands for pressure washers worldwide. From small projects to large enterprises to whatever needs to be cleaned up, power washer Karcher parts has the ideal solution. The Karcher power washers parts 25 ‘replacement hose includes four adapters. These four adapters are for compatibility with both quick connections and M22 threaded connections. The 25-foot high-pressure hose is rating at 3600 psi. It fits most brands of both electric and gas pressure washers. Compatible with Karcher gas models rated at 3600 psi and Karcher electronic model K1700-K2000. pressure washer Karcher parts do not fit the electronic model K2-K5.
- M22 female threaded fittings
- 25 feet thermoplastic hose
- Rated 3600 psi
- Fits most power washer brands
- Adapter included for compatibility
- 25-foot thermoplastic hose
- 3600 psi rating
- Industry-standard fittings
- Work with many brands
- 90 days warranty
- You may not enjoy its durability
- Creating quality is not at the top
08. Sun Joe Hose Adaptor Series SPX-AGHA Universal 3/4-Inch Aluminum hot water pressure washer parts to Garden, Green
Mark has a husky pressure washer that his neighbor gave him because the adapter for the hose broke. Many times he wanted to replace the adapter, but this one is very cheap and works for the same purpose. Screen filter and rotating cap for the hose to help hose attachment. It’s plastic and aluminum, so the hand just stiffens. Mark has very little leakage which he can tolerate as it is a pressure washer that is used for a short time. And it is not attached to the left. Since it and the washer use plastic and aluminum, he rather plays it safe. Mark said he is so glad because he finally got to use Sun Joe Hose Adaptor.
Mark bought it as a replacement for his Campbell-Hausman PW. The original is all plastic and after several years of use, the thread is not stiff enough to seal properly. The measurement is 3/4 inch so this product fits perfectly with aluminum and fits towards the PW. Great product but you don’t need to if you bought Sun Joe. If you lose/break the other, this product would be perfect for to best replacement.
- Universal 3/4-inch aluminum pressure washer
- Compatible with all Aspex-Series pressure washers
- The country of origin is China where it is producing
- No assembly is necessary for this item
- Sturdy, easy to loosen, no leaks
- Works perfectly for your application
- Compatible with Campbell Houseman Pressure Washer
- It fits perfectly and it takes care of your leaky pressure washer
- Same as the original adapter supplied with the unit
- A cheap plastic version that comes with a pressure washer
- You don’t need it if you don’t want to lose the original part
09. Pressure Parts 1526173 M22 Ultimate pressure washer parts amazon 3/8 Inch Quick Connect Kit
The focus is that the M2214 swivel fitting has a diameter of 14mm; leaks can occur if a washer needs 15mm. Not the electric pressure washers of Sun Joe, Campbell, MI-TM, AR Blue, Stanley, Kleinforce, Simonies. There are two 3/8 ” M22 Male Quick Connect Couples. There are two 3/8 ” M22 Female Quick Connection Plugs and two 3/4 “Garden Hose Quick Connector. It Sets for 3/4 Hose or 3/4 Hose “Garden Hose Quick Connector. This will set all 3/4” Standard Washer Pump. It is an attaches Standard Garden Hose to Water Inlet Each Male and Female, 2 pairs.
Gas pressure washers will have 15mm and will have 14mm as standard and electric pressure washers. The way you many want to be double-checked with a digital caliper from HF is possible with this item. You can measure the pressure washer near the hose. It is better to replace if your pressure washer is an electric AR unit.
- Heavy little boys, seem to be of good quality
- Incredible quality craftsmanship
- Simplifies using a power washer
- Assemble with a shut-off valve at the end of the hose
- A good quality connection set that works well
- Karcher K1700 (Lots of back pressure)
- The 50-foot hose goes for a long time
- Chemical guy’s snub gun with 3.0mm tips
- MTM Hydro Foam Gun 1.1mm Orpheus
- LOVHO poly-filter attachment
- You will not be happy with its quality
- Springs on the female end may be weak
10. Upgrade Pump Head Kit for Pressure Washers – RMW2.2G24
Please review all product information to make sure this product is compatible with your unit. There is a message to the customer from the company. They constantly strive to provide clear and concise product information. They said we understand that sometimes it can be difficult to ensure product compatibility. It is your job to discover what that is and to bring it about.
Therefore, we encourage all customers to review the information provided in this listing before purchasing. There is nothing worse than returning a product. Let’s work together to avoid it If you are unsure about this product. if this is the right product for your unit, please ask. If you would like assistance, we will need the following information as much as possible. We will help you to find the product you are looking for: model, spec and/or type number, code and/or serial number, or year.
- A good quality connection set that works well
- Fits most power washer brands
- Adapter included for compatibility
- Real quality and works great
- This pump works perfectly but requires cooling
- Perfect fit and easy to install
- Great customer service with problems
- Great description of your web site
- Easy swap out
- Install and pay attention to all your set instructions
- Get help from customer service but wait for the answer
People Also Ask Google For Answers:
1. Are Press Washer Accessories Interchangeable?
Gas pressure washers are more universal. These are making it easier to match them with a variety of accessories and couplings. However, electric pressure washers will be brand specific, meaning that only specific accessories or parts from the same manufacturer will be compatible.
2. Which is the best pressure washer for home use?
Why it is our top pick electrically driven. For most people, the best electric pressure washer around the house is this new model AR Blue Clean – AR2N1.
3. What is a good PSI for a pressure washer?
1300-1700 pounds per square inch is a good PSI for the best pressure washer. Most electric pressure washing produces 1300-1700 pounds with 1.5 gallons of water flow per square inch (psi) per minute (GPM). But experienced contractors recommend a flow of 2000 to 3000 psi and a minimum of 2.5 GPM for minimum cleaning.
4. Is it worth buying a pressure washer?
A pressure washer can greatly enhance your ability to maintain and clean what makes your property and equipment more valuable. If your time is valuable then a pressure washer can be a good investment. But if you get the wrong machine you will be frustrated and you can waste a lot of time and money.
5. Is your car wash safe?
No. Lots of people certainly use a pressure washer to clean their car but it can do more harm than good. With the help of a pressure washer, the paint goes to damage or nick, which can be rusty. And a car wash usually works just fine – so do a garden hose and soap sponge.
All of the above-mentioned pressure washer parts are selected from more than 50 popular parts. All are quality and made with standard materials. You can look for items that support your washer machine. Read product specifications, highlights, pros, and cons. Within this brief, you can easily understand what the benefits are having with these parts. All items have support from the company’s customer service. Buy your item with confidence and make easy contact with the company’s customer service.